Kupo Max Arm with Adjustable Handle

The Max arm is specially designed for lighting video film and photography. It's an adjustable arm that allows you to position a camera lighting fixture or accessory in any position within seconds! The two 5/8" (16mm) studs at either end are attached to ball joints rotate 360 degrees plus a cut-out in the sleeve surrounding the joint allows the stud to be bent at a 90 degree angle. One stud is tapped to receive a 3/8" - 16 thread while the other is tapped to receive 1/4 - 20 thread. Each stud has six milled flat surfaces so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability. The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The adjustable ratcheted handle slowly increases tension until all three joints lock at once making precise positioning a breeze. Supports loads of up to 8.8 lbs (4 Kg) Black Aluminum Finish

Weight:

1.98lb / 0.9kg

Color:

Black

Product Height (in):

6.3in

Product Height (cm):

16.0cm

Product Length (in):

7.87in

Product Length (cm):

20.0cm

Product Width (in):

6.3in

Product Width (cm):

16.0cm

Product Weight (lb):

1.98lb

Product Weight (kg):

0.9kg

Maximum Payload Capacity (lb):

8.82lb

Maximum Payload Capacity (kg):

4.0kg

Maximum Extension (in):

20.87in

Maximum Extension (cm):

53.0cm

Primary Material:

Aluminum & Steel

Secondary Material:

Thermoplastic Rosettes

Warranty:

Limited Two-Year Warranty